Clear Care Plus 3% Hydrogen Peroxide Cleaning & Disinfecting Solution HydraGlyde
Clear Care Plus 3% Hydrogen Peroxide Cleaning & Disinfecting Solution HydraGlyde0 0.0
- SKU: 853463882
- UPC: 30065036339
- Size: 12 OZ
- Manufacturer: CLEAR CARE
To ensure proper cleaning and disinfection of your lenses you must follow the instructions completely. Do not skip any steps. Always wash and rinse your hands before handling your lenses. 1. Remove and place each lens into the appropriately marked L/R domed lens holder. Rinse with Clear Care for 5 seconds. 2. Fill the lens case to fill line with Clear Care and place the lens holder in the lens cup. Do not underfill or overfill. 3. Tighten the cap on the lens cup and store lenses for at least 6 hours. Do not shake the case. Your lenses are ready to wear after soaking for 6 hours. Always use the new lens case provided with each new purchase of clear care.* Plus dispose of you old lens case. Always follow your eye care professional's instructions. Please refer to the package insert printed on the inside of this carton for detailed directions and important safety information. Store at room temperature. Once bottle is opened, discard any remaining solution after 3 months of first opening.
Micro-Filtered Hydrogen Peroxide 3%; Sodium Chloride 0.79%; Stabilized with Phosphonic Acid; a Phosphate Buffered System; Pluronic 17R4 (a Cleaning Agent); HydraGlyde Moisture Matrix (EOBO-21-Polyoxyehtylene-Polyoxybutylene)
CONTRAINDICATIONS (Reasons not to use); Do not use if you are allergic to any of the ingredients. Keep Clear Care* Plus out of reach of children. WARNINGS NOT FOR DIRECT USE ON EYE. If non-neutralized Clear Care* Plus gets into your eyes it will cause burning and stinging. Remove your contact lenses immediately and flush eyes with a large amount of water or sterile saline. Seek immediate assistance from an eye care professional. Never put non-neutralized Clear Care* Plus directly into eye. Never rinse your contact lenses with Clear Care* Plus before you put them in your eyes. If you want to rinse your lenses, use sterile saline. Do not use a flat case. Only use Clear Care* Plus with special lens case provided. Do not remove lenses from the lens case for at least 6 hours. The solution needs time to neutralize.