AOSEPT Disinfectant Solution - 12 Ounces

To ensure proper disinfection of your lenses you must follow the instructions completely. Do not skip any steps. Always wash and rinse your hands before handling your lenses. 1. Clean - After removing your lenses, use a daily cleaner such as MiraFlow Extra-Strength Daily Cleaner to clean your lenses. Cleaning your lenses removes irritating deposits and prepares them for disinfection. 2. Rinse - Rinse daily cleaner away with a saline such as Softwear Saline. Place lenses in the appropriate L/R AOSEPT domed lens holder. 3. Disinfect/Neutralize - You must use AOSEPT Disinfecting Solution and AOSEPT Disposable Cup and Disc system for disinfection and neutralization. Fill the AOSEPT Disposable Cup to fill line with AOSEPT Disinfecting Solution and place the lens holder in the cup. Tighten the cap and store lenses for at least 6 hours or overnight. Do not shake the lens cup. Your lenses are ready to wear after soaking for six hours. Rinse your lenses with fresh saline before inserting them in your eyes. See package insert printed on inside of carton for detailed directions and important safety and other information.

Sterile Solution Containing: Microfiltered Hydrogen Peroxide 3%; Sodium Chloride 0.85% Stabilized With Phosphonic Acid and Buffered With Phosphates

Do not use a flat lens case. AOSEPT Disinfecting Solution only works with AOSEPT Disposable Cup and Disc sold separately. DO NOT remove lenses from lens cup for at least 6 hours. A minimum of 6 hours is required to neutralize the disinfecting solution. DO NOT rinse lenses with AOSEPT prior to inserting lenses into your eyes. DO NOT squirt AOSEPT directly into your eyes. To rinse lenses thoroughly, use a sterile saline like SoftWear Saline. Contraindications: There are no known contraindications for use of AOSEPT Disinfecting Solution. If you are allergic to any ingredient in this solution, do not use.